Thursday, July 28, 2011

How to Install NAND Android on HTC HD2 with ClockWorkMod Recovery


SmartDialing 2.5 build 24516 Full, Multilanguage v3

Russian T9 for Phone Pad Input v1.0 build 21215 (IntelliPad), also add possibility to enter ukrainian letters (not T9)

This is result of some kind team-work of me (ValeraVi), and mamaich 8). After installing you will be able to write russian words in Phone Pad Input by using T9. Also this adds support of writing russian and ukrainian words (when russian database is selected in options of Phone Pad). Ukrainian letters is not fit on virtual buttons but it is on buttons with similar russian letters. English letters is also exist - it can be entered only if you select english database in options on Phone Pad.
Tested on HTC Blue Angel with clean WM5 ROM Tuma v1.3, but it must work on any device with version of Phone Pad specified above (HTC Wizard for ex.).
download (from attachments)

Full Phone Pad with russian t9 for wm5 devices without preinstalled Phonepad(Atom, M600, Mio...) by geo77 here
Phone Pad v1.0b22364 ONLY SKIN with Russian Letters by Raice here

[ROM] [Kitchen] TMN Silverbelt (ZTE Raise, ZTE-W x60) custom ROM

This topic is about custom ROM for TMN Silverbelt (aka ZTE Raise, aka ZTE x60 and so on).

In June, 2010 I received a ZTE Raise (ZTE-W x60) handset as a gift. Unfortunately, the system language was Chinese, and I am from Russia 
The only normal firmware was from the Portuguese TMN Silverbelt, but it was in Portuguese language, and overloaded by useless TMN's soft.
I had to do some research and apply my own knowledge to create custom firmware. The results will be shown in this topic.

1. All surveys were made on the basis of the TMN Silverbelt firmware B08 and ChinaUnicom ZTE-W x60 firmware B02.
2. If your device bricked, you can try to flash it by original flashers (B05 or B08). I've flashed my ZTE Raise hundreds of times - bootloader still alive.
3. ZTE Raise (ZTE-W x60) is differs from TMN Silverbelt by hardware. ZTE Raise have 3.2mpx back camera without flash, front camera for videocalls and have no WIFI. TMN Silverbelt have WIFI, 5.0mpx back camera with flash and have no front camera. ZTE-W x60 is made for ChinaUnicom, and Silverbelt - for Portuguese TMN. You should understand that I have ZTE-W x60. So I can't test TMN camera and WIFI.

If you encounter problems, please do not hesitate to write here or contact me. Please describe the problem accurately and in detail.
Note that I can only help with these ROM. For general questions about cooking ROMs, please consult the forum and Wiki at
You should know two things: 1. I speak only English and Russian. Por favor, nao escreva em Portugues And sorry for my english. 2. My local time is GMT+10.

1. Before you flash this ROM, make sure you know how to recover from a non-booting ROM or to original ROM!
2. I accept no responsibility for bricked or network-locked devices or any other problems!
3. Please, read instruction in downloaded package and post below (but remember abour error in those files - in section "How to update ROM", step 2 should be read as "2. Hold the Answer+Action buttons..." and so on). Any way, my updater.exe made based on TMN B05 flasher engine so they need to flash the same way as the original firmware B05.
4. I strongly recommend first flash phone with TMN's B08 firmware before using this firmware.
5. After every flashing you MUST perform a hard reset!


Clean ROM for TMN Silverbelt and ZTE-W x60

Main features:
- clean ROM, only must-have software
- based on B08 TMN firmware
- all security checks was disabled
- PagePool size 20mb
- dummy UL partition
- ActiveSync activity limited
- Office Mobile 2010 integrated
Also see changelog in next post for more details.

Note to ChinaUnicom's ZTE-W x60 owners:
This firmware natively made for TMN Silverbelt hardware. It can be flashed into ChinaUnicom's handset ZTE-W x60 too. In this case you should flash your phone three times: with original TMN firmware B05, than B08, and finally this custom firmware. After booting, go Start -> Utilites, launch "Raise Control", Select "Camera: use ZTE-W x60 driver" then reboot your handset. Other soft that you may need can be found in bottom of this post.

Updated 2010-10-20.

English ROM (409) download:

Portuguese ROM (816) download:

Sunday, July 24, 2011

Uet entry test cancelled

41,000 candidates appeared for entry tests for total 4,000 seats, but the test was already leaked. Dunya News aired news of the leaked paper first of all, prompting the Educational authorities to cancel the paper. Candidates told Dunya News that they solved exactly the same paper they had got beforehand. It was not immediately announced when would the test be conducted now. The test was conducted in Lahore, Multan, Rawalpindi, Gujrat, Faisalabad, Bahawalpur. Other than these cities, tests are also being conducted in Taxila, Karachi, Quetta and Peshawar. The results of the tests were to be announced on August 3 at 11pm. Some 5,941 students applied for entry to Engineering College, Bahauddin Zakariya University, Multan.
The test started simultaneously at University of Engineering and Technology (UET), Lahore, UET, Taxila, Bahauddin Zakariya University s Engineering College, Multan, Islamia University Bahawalpur (IUB), NFC Institute of Engineering Research and Fertiliser, Faisalabad, University of Gujrat, Siddique Public School, Satellite Town, Rawalpindi, NED University of Engineering and Technology, Karachi, KPK University of Engineering and Technology, Peshawar and Balochistan Boys Scout Association Office, Quetta.

UET Entry Test Paper Leaked Out, New Date Of UET Entry Test 2011

UET Entry Test Paper Leaked Out
UET Entry Test Paper Leaked Out
Separately, Entrance Test for Academic Session 2011-12 of the University of Engineering and Technology Peshawar was successfully held Sunday at Col. Sher Khan Shaheed Stadium, Peshawar, and Ayub Medical College, Abbottabad, simultaneously. The test was conducted by Educational Testing and Evaluating Agency (ETEA) KP Government. Around 12,600 candidates from Khyber Pakhtunkhwa, including FATA, AJK and Gilgit Baltistan sat for entrance test. The results of the test will be announced in 36 hours, and will be available at websites of ETEA and UET and as well at main notice board of Engineering University’s Peshawar Campus.
At Peshawar Centre, a total of 10938 candidates appeared in the test, with 10569 male and 288 female candidates, for admission in engineering disciplines, while a total of 414 candidates appeared for Computer Science group, which include 384 male and 30 female candidates. At Abbottabad Centre among the 1574 candidates, there were 1404 male and 170 female candidates for engineering group, whereas 28 male and 15 female candidates for the computer science group appeared for the entrance test.